CADfix provides sound basis for acoustic analysis
Aviation has benefited more than most industries from the information revolution. The systems that keep aircraft in the air and guide them safely to their destinations are increasingly reliant on electronics, both onboard the aircraft themselves and elsewhere, be it on the ground or, increasingly, orbiting the planet. Ensuring that these systems work in harmony with each other and with natural electromagnetic phenomena such as lightning is a vital part of the aircraft manufacturer's job.
Military aircraft are still more reliant on electronics. As well as navigation and flight control they also need to be able to locate, identify and pinpoint potential threats and targets. Some of these activities involve powerful laser and radar systems with significant levels of electromagnetic radiation. It is therefore vital that the various systems do not interfere with each other or compromise the safety of the crew. These are among the sensitive issues dealt with by the experts at BAE SYSTEMS.
BAE SYSTEMS
Responsibility for BAE SYSTEMS whole vehicle electromagnetic testing and
analysis falls under the auspices of the Electromagnetic Engineering and Test
department based at Warton, Lancashire, a department which reflects the planned
change of remit from just aircraft to a broader base of land, sea and air
vehicles.
Such developments are likely to put an even greater strain on the computation analysis team. "Our product portfolio already includes Nimrod and Eurofighter, both extremely complex aircraft in their own different ways," says Chris Jones, Technologist Consultant in the Electromagnetic Engineering department.
"Each vehicle we deal with has probably been designed in a number of different locations and possibly with a number of different design systems.
But the analyses we perform demand a single, accurate geometric representation and the generation of this geometry is often the single biggest challenge. With new vehicles coming online it will be more vital than ever that we can maintain the integrity of our data - and fast."
Multiple modellers - multiple solvers
Chris and his team have been using electromagnetic analysis software since it
first became a viable option over 15 years ago. Even then, with the CAD market
still relatively young, a survey revealed that there were no less than 17 CAD
systems in use within BAE SYSTEMS. Consolidation has reduced this number
significantly today but there remains a daunting diversity when it comes to
defining geometry for computational analysis.
"Eurofighter is a classic example: the complete geometry comes from four different countries, Germany, Italy, Spain and the UK." says Chris. "We have to bring all this data into a neutral environment, clean it up where necessary, assign material properties, generate a mesh and then format this so that it can be used in our analysis packages."
Even if there was just a single analysis package this would be problematical enough, but the different flavours of electromagnetic simulation performed at BAE SYSTEMS all demand different codes and different ways of defining mesh geometry. Analysis methods include, among others, generic transmission line matrix (TLM), finite difference methods and boundary element methods, as well as systems that have been specifically developed for lightning strike and installed antenna performance analysis.
"In effect, we go from a set of CAD systems to a set of numerical analysis codes," says Chris. "Fortunately, we have found a way to avoid a separate data processing nightmare for every combination."
Enter CADfix
BAE SYSTEMS EE&T uses CADfix, the leading data interoperability tool
developed by TranscenData (formerly FEGS), as a central resource of geometric
data. Because it offers a reliable link - either directly or via IGES - to
every major CAD system on the market, CADfix provides the perfect platform for
such a diverse range of data. And because of TranscenData's long heritage in
the pre- and post-processing for FEA (CADfix's underlying technology draws
heavily on FAM, TranscenData's widely used FE modeller) it is offers the
perfect route from raw geometry to refined, analysis-ready mesh.
"CADfix is at the heart of everything we do," says Paul Baker, a BAE SYSTEMS Computational Electromagnetics (CEM) specialist. "In effect we use it as the hub of our operation, a central resource for all the geometry we have to work on. Whatever kind of analysis we need to perform, whatever mesh we need, the starting point is always the clean geometry that's been assembled inside CADfix."
Meshing at speed
As well as providing a central data resource, CADfix also makes its presence
felt in a manner perhaps more typically associated with TranscenData solutions.
Before BAE SYSTEMS began using FAM - and later its successor, CADfix - the
generation of the meshes on which calculations are based was essentially a
manual operation and therefore a lengthy one. Now, meshes are generated
directly within CADfix and the time savings are enormous: a single wing could
take six to nine months previously; a whole plane can now be meshed in just
three or four hours.
"Even with the powerful computers we use, an analysis of a complete aircraft can take about ten days," says Paul.
"So the last thing we need is to spend ages building meshes. With CADfix we can generate new meshes in just a few hours so we are not restricted when it comes to trying a different kind of analysis."
Graphical feedback
CADfix's powerful post processing capabilities are also used to the fore at BAE
SYSTEMS. "We use pretty standard mathematical software to retrieve the precise
graphs and figures we need for our reports and safety checks," says Paul. "But
our first port of call is always CADfix, where we can display field contours on
the original CAD model.
This gives an instant picture of where we should be looking for maximum concentrations, and while this is often not much more than a 'sanity check' to make sure we're looking in the right place, it does throw up the occasional surprise."
Spark out
One such revelation came when looking at the effects of a lightning strike on
the cockpit of the Eurofighter.
"Our initial analysis confirmed that a modified design performed just as well as the original, but it also revealed a slight anomaly that would have been impossible to spot through physical testing," says Paul. "It showed that, during a lightning strike a small but significant current passed through some aerodynamic strakes on the outside of the cockpit. Although this current was within safety standards, there was a very small chance that a spark could have formed at one of the strake's fasteners. Such sparking is the last thing you want in a jet fighter."
"Such problems can usually be fixed quite easily if caught early enough - in this case with a relatively simple design modification," says Chris Jones.
"But without the depth of analysis we get from using CADfix it could have taken us years to spot something so subtle."
Note to editors:
About TranscenData
TranscenData is the product data interoperability business within International
TechneGroup Incorporated (ITI). TranscenData provides interoperability
solutions that enable companies to effectively exchange, reuse, and share
engineering product data among diverse software applications used throughout a
manufacturing enterprise and it's supply chain.
TranscenData solutions are aimed directly at reducing and eliminating non-value-added time and costs associated with reusing product data. TranscenData solutions are distributed worldwide through a combination of direct sales, resellers, and strategic vendor/OEM partners.
About BAE SYSTEMS:
BAE SYSTEMS is the truly global systems, defence and aerospace company.
BAE SYSTEMS employs more than 100,000 people and has annual sales of some £12 billion. The company offers a global capability in air, sea, land and space with a world-class prime contracting ability supported by a range of key skills.
BAE SYSTEMS designs and manufacturers civil and military aircraft, surface ships, submarines, space systems, radar, avionics, communications, electronics, guided weapon systems and a range of other defence products.
For further information, please contact:
|
Ben Bush/Nick Lerner
The CroCodile Public Relations. Tel: 020 7749 4400 Fax: 020 7739 4042 |
or |
John Meaney
TranscenData Europe Limited. Tel: 01223 237 111 Fax: 01223 234 192 |
Issued by The CroCodile Public Relations, The Lux Building
2/4 Hoxton Square, London N1 6NU